NSN 5985-01-063-1474 VHF/UHF Antenna AS-3244/TS

Frequency Range: 116-150/225-400/116-150 MHz
Gain: 1 dBi
VSWR: 2.0:1 Nominal : 3.0:1 Max 3.0:1 Max
Polarization: Vertical
Pattern: Omnidirectional
Size: 168″ L
NSN: 5985-01-063-1474
Military Nomenclature: AS-3244/TS
Model Number: DPV-70
Part Number(s): 1000-1373-201



 View Product Specs PDF   |   Request Quote

Not finding what you're looking for? We can custom-build antennas to your exact specifications.
Contact us here or call 1-940-325-3301 for more information.

SKU: DPV-70 Category:

Additional Product Info

The DPV-70 antenna consists of three vertically polarized, omnidirectional, dipole antenna elements in a common filament-wound fiberglass radome assembly. The two VHF sections cover the frequency range of 116 to 150 MHz and the UHF section covers the 225 to 400 MHz frequency range. The antenna is configured with VHF as the bottom element, a UHF antenna as the middle element, and a second VHF antenna element in a removable top section. The antenna is designed for ground-to-air communication and use in an extreme environment. It is provided with an off set base for mounting on a 3 inch OD pipe.

Spec Sheet


Frequency Range 116-150 & 225-400 & 116-150 Mhz
VSWR 2.0:1 Nominal : 3.0:1 Max 3.0:1 Max
Gain 1 dBi
input Impedance 50 Ohms
Mounting designed for offset mounting to a 3 inch diameter pipe using a permanently attached base
Finish green CARC paint
Wind 100 MPH wind with .5 inches of radial ice
Size 168 inches, Length
Shipping Weight 18.5 lbs
Radome Diameter 2.9 inches
Number of Inputs 3
Isolation 30 dB Minimum
Power Capability 50 Watts each input
Minimum Elevation Beam Width 65 Degrees
Military Nomenclature AS-3244
Elevation Beam Maximum Location Horizon, plus or minus 10 degrees
Azimuth Coverage Omni, plus or minus 1 dB
Radome Material The radome is filament wound epoxy fiberglass that exhibits superior environmental capabilities.