UHF Triple Band Antenna Omni 225-400/225-400/225-400 MHz

Frequency Range: 225-400/225-400/225-400 MHz
Gain: 0 dBi
VSWR: 2.0:1 max
Polarization: Vertical
Pattern: Omnidirectional
Size: 136″ L
Model Number: DPV-60
NSN: 5985-01-154-7328

 View Product Specs PDF   |   Request Quote

Not finding what you're looking for? We can custom-build antennas to your exact specifications.
Contact us here or call 1-940-325-3301 for more information.

Additional Product Info

GSA-badge The DPV-60 consists of three vertically polarized, omnidirectional, UHF dipole antennas mounted coaxially. All three dipoles operate over the frequency band of 225 to 400 MHz. Each dipole operates independently and has a separate input connector. The antennas are normally used on line-of-sight propagation paths such as ground-to-air and point-to-point communications circuits. The antenna is sealed in a fiberglass radome that provides mechanical stability and environmental protection of electrical components. It is provided with a coaxial mounting arrangement for mounting atop a 2-1/2 inch IPS pipe, enclosing the electrical connections away from the environment.

Spec Sheet


Frequency Range 225-400, 225-400, & 225-400 MHz
VSWR 2.0:1 Max
Gain 0 dBi
input Impedance 50 Ohms
Mounting coaxial mounting on the end of a 2.5 IPS pipe
Wind 100 MPH with .5 inches of radial ice
Power Capability 100 watts each input
Length 136 inches
Shipping Weight 22 pounds
Number of Inputs 3
Radome Diameter 3.25 inches
Isolation 30 dB
Minimum Elevation Beam Width 65 degrees
Finish gray polyurethane paint
Elevation Beam Maximum Location Horizon, plus or minus 10 degrees
Azimuth Pattern Omni, plus or minus 1 dB
Radome Material The radome is filament wound epoxy fiberglass that exhibits superior environmental capabilities.
Equipment Supplied UG-1185 mating connectors, .375-16 stainless steel mounting bolts, and a grounding lug.