Model DPV-50B
VHF/UHF Multi Band Antenna Omni 100-156/225-400/225-400 MHz

Frequency Range: 100-156/225-400/225-400 MHz
Gain: 0 dBi
VSWR: 2.0:1
Polarization: Vertical
Pattern: Omnidirectional
Size: 163.5″ L

Request Quote

Not finding what you’re looking for? We can custom-build antennas to your exact specifications.
Contact us here or call 1-940-325-3301 for more information.


The DPV-50B antenna consists of three vertically polarized omnidirectional dipole antenna elements. The center dipole covers the frequency range 225 to 400 MHz and the upper and lower dipoles cover the frequency range 100 to 156 MHz. The dipole elements are mounted one above the other on a common axis. This dipole is sealed in a single fiberglass radome that provides both mechanical stability and environmental protection. The antenna is designed for ground-to-air communications and use in an extreme environment. It is provided with a coaxial mounting arrangement to mount atop a 2-1/2 inch IPS pipe, enclosing the electrical connections away from the environment.

Spec Sheet


Frequency Range 100-156 & 225-400 & 225-400 MHz
VSWR 2.0:1
Gain 0 dBi
input Impedance 50 Ohms
Mounting mounting on the end of a 2.5 IPS pipe.
Power Capability 100 Watts each input
Wind 150 MPH wind with .5 inches of radial ice
Size 163.5 inches, Length
Number of Inputs 3
Isolation 30 dB
Radome Diameter 4.75 inches
Shipping Weight 40 lbs
Finish gray polyurethane paint
Elevation Beam Maximum Location Horizon, plus or minus 10 degrees
Azimuth Coverage Omni, plus or minus 1 dB
Radome Material The radome is filament wound epoxy fiberglass that exhibits superior environmental capabilities.
Equipment Supplied UG-1185 mating connectors, .375-16 stainless steel mounting bolts, and a grounding lug.