DPV-85

UHF 5 Element Antenna Omni 225-400 MHz

Frequency Range: 225-400/225-500/225-400/225-500/225-400 MHz
Gain: -1 to + 1 dBi
VSWR: 2.0:1
Polarization: Vertical
Pattern: Omnidirectional
Size: 374″ L

Request Quote

Not finding what you're looking for? We can custom-build antennas to your exact specifications.
Contact us here or call 1-940-325-3301 for more information.

Additional Product Info

GSA-badge The DPV-85 antenna consists of five vertically polarized, omnidirectional, dipoles each covering the frequency range of 225 to 400 MHz. The dipoles are mounted one above the other on a common axis. These dipoles are sealed in a single fiberglass radome that provides both mechanical stability and environmental protection. The antenna is designed for ground-to-air communication and use in an extreme environment.

Spec Sheet

SPECIFICATIONS

PERFORMANCE
Frequency Range 225-400, 225-500, 225-400, 225-500 & 225-400 MHz
VSWR 2.0:1
Gain -1 to + 1 dBi
input Impedance 50 Ohms
Mounting The DPV-85 is designed for flange mounting with 4 each 1.0 inch diameter bolts on a 11.5 inch BC.
Radome Diameter 10.5 inches, tapers to 6.3 inches
Power Capability 100 watts CW each input
Wind 120 MPH wind with 160 MPH gusts without guy wires
Isolation 30 dB Minimum
Weight 335 lbs
Minimum Elevation Beam Width 35 degrees
Size 374 inches, Length
Number of Inputs 5
Finish CARC Paint
Elevation Beam Maximum Location Horizon, plus or minus 10 degrees
Azimuth Coverage Omni, plus or minus 1 dB
Radome Material The radome is filament wound epoxy fiberglass that exhibits superior environmental capabilities.
Equipment Supplied UG-1185 mating connectors