VHF/UHF Dual Band Antenna 140in Omni 100-156/225-400 MHz

Frequency Range: 100-156/225-400 MHz
Gain: 0 dBi
VSWR: 2.0:1
Polarization: Vertical
Pattern: Omnidirectional
Size: 140 3/16″ L

Request Quote

Not finding what you're looking for? We can custom-build antennas to your exact specifications.
Contact us here or call 1-940-325-3301 for more information.

Additional Product Info

GSA-badge The DPV-39AL antenna consists of two vertically-polarized, omni-directional dipoles. The VHF dipole covers the frequency range of 100-156 MHz and the UHF dipole covers the frequency range 225-400 MHz. These dipoles are sealed in a single fiberglass radome that provides both mechanical and environmental protection. The antenna is designed for ground-to-air communications and use in an extreme environment. The antenna mounts atop a 2 1/2 inch IPS pipe enclosing the electrical connections away form the environment. The antenna is also provided with a lightning rod adapter consisting of a #6 AWG solid conductor running the entire length of the structure terminating at the top in a ten inch long lightning rod. Customer interface is a servit post which serves as a mounting bolt and attachment point for a ground wire.

Spec Sheet

SPECIFICATIONS

PERFORMANCE
Frequency Range 100-156 MHz & 225-400 MHz
VSWR 2.0:1
Gain 0 dBi
input Impedance 50 Ohms
Mounting coaxial mounting on the end of a 2.5 inch IPS pipe
Wind 100 MPH wind with .5 inches of radial ice
Power Capability 100 Watts Each Input
Shipping Weight 12 lbs
Size 140 3/16 inches, Length
Number of Inputs 2
Radome Diameter 2.35 inches
Isolation 30 dB Minimum
Minimum Elevation Beam Width 65 Degrees
Finish gray polyurethane paint
Elevation Beam Maximum Location Horizon, plus or minus 10 degrees
Azimuth Coverage Omni, plus or minus 1 dB
Radome Material The radome is filament wound epoxy fiberglass that exhibits superior environmental capabilities.
Equipment Supplied UG-1185 mating connectors, .375-16 SST mounting bolts and nuts